Ikai Lan says

I say things!

Archive for the ‘Java’ Category

Getting started with jOOQ: A Tutorial

with 10 comments

Introduction

I accidentally stumbled onto jOOQ a few days ago while doing a lot of research on Hibernate. Funny how things work, isn’t it? For those of you that aren’t familiar with it, jOOQ is a different approach to the over-ORMing of Java persistence. Rather than try to map database tables to Java classes and abstract away the SQL underneath, jOOQ assumes you want low level control over the SQL queries you execute, and provides a mostly typesafe interface for executing queries. I don’t have anything against simple ORMs, but it’s good to have the right tool for the right job. From the jOOQ homepage:</p?

Instead of this SQL query:

SELECT * FROM BOOK
   WHERE PUBLISHED_IN = 2011
ORDER BY TITLE

You would execute this Java code:

create.selectFrom(BOOK)
      .where(PUBLISHED_IN.equal(2011))
      .orderBy(TITLE)

Why a Java interface? Type safety, for one. Programmatically using jOOQ’s DSL has some advantages over writing SQL queries by hand, such as IDE support and compile time checking of some things.

The idea interested me and I dug in. Unfortunately, the jOOQ site’s documentation, while fairly comprehensive, DO NOT PROVIDE AN END TO END “GETTING STARTED” PAGE!!! This means that if you want to learn jOOQ, you’ll have to jump to the chapter about Meta model code generation, then jump to the DSL, then jump to jOOQ classes section. It’s a bit of a mess for new users. Google search also didn’t turn up many useful results, so I figured I’d whip up a quick “Getting started” guide. We’re going to go over the following steps:

Preparation: Download jOOQ and your SQL driver
Step 1: Create a SQL database and a table
Step 2: Generate classes
Step 3. Write a main class and establish MySQL connection
Step 4: Write a query using jOOQ’s DSL
Step 5: Iterate over results
Step 6: Profit!

Ready? Let’s get started.

Getting our hands dirty

Preparation: Download jOOQ and your SQL driver

If you haven’t already downloaded them, download jOOQ:

http://sourceforge.net/projects/jooq/files/

For this example, we’ll be using MySQL. If you haven’t already downloaded MySQL Connector/J, download it here:

http://dev.mysql.com/downloads/connector/j/

Stash these somewhere where you can get to them later.

Step 1: Create a SQL database and a table

We’re going to create a database called “guestbook” and a corresponding “posts” table. Connect to MySQL via your command line client and type the following:

create database guestbook;

CREATE TABLE `posts` (
  `id` bigint(20) NOT NULL,
  `body` varchar(255) DEFAULT NULL,
  `timestamp` datetime DEFAULT NULL,
  `title` varchar(255) DEFAULT NULL,
  PRIMARY KEY (`id`)
);

(I copied and pasted the create table statement from a “show create table” command)

Step 2: Generate classes

In this step, we’re going to use jOOQ’s command line tools to generate classes that map to the Posts table we just created. The official docs are here.

I’m going to augment the command line steps a bit. The easiest way to generate a schema is to copy the jOOQ jar files (there should be 3) and the MySQL Connector jar file to a temporary directory. Create a properties file. I’ve created a file called guestbook.properties that looks like this:

#Configure the database connection here
jdbc.Driver=com.mysql.jdbc.Driver
jdbc.URL=jdbc:mysql://localhost:3306/guestbook
jdbc.Schema=guestbook
jdbc.User=ikai
jdbc.Password=

#The default code generator. You can override this one, to generate your own code style
#Defaults to org.jooq.util.DefaultGenerator
generator=org.jooq.util.DefaultGenerator

#The database type. The format here is:
#generator.database=org.util.[database].[database]Database
generator.database=org.jooq.util.mysql.MySQLDatabase

#All elements that are generated from your schema (several Java regular expressions, separated by comma)
#Watch out for case-sensitivity. Depending on your database, this might be important!
generator.database.includes=.*

#All elements that are excluded from your schema (several Java regular expressions, separated by comma). Excludes match before includes
generator.database.excludes=

#Primary key / foreign key relations should be generated and used. 
#This will be a prerequisite for various advanced features
#Defaults to false
generator.generate.relations=true

#Generate deprecated code for backwards compatibility 
#Defaults to true
generator.generate.deprecated=false

#The destination package of your generated classes (within the destination directory)
generator.target.package=test.generated

#The destination directory of your generated classes
generator.target.directory=/Users/ikai/workspace/MySQLTest/src

One thing that wasn’t clear from jOOQ’s docs is the value of jdbc.Schema: it should be your database name. Since our database name is “guestbook”, that’s what we put. Replace the username with whatever user has the appropriate privileges: in my local dev database, my user has what is effectively root access to everything without a password. You’ll want to look at the other values and replace as necessary. Here are the two interesting properties:

generator.target.package – set this to the parent package you want to create for the generated classes. My setting of test.generated will cause the test.generated.Posts and test.generated.PostsRecord to be created

generator.target.directory – the directory to output to. Worst case scenario you can just copy the files to the package.

Once you have the JAR files and guestbook.properties in your temp directory, type this:

java -classpath jooq-1.6.8.jar:jooq-meta-1.6.8.jar:jooq-codegen-1.6.8.jar:mysql-connector-java-5.1.18-bin.jar:. org.jooq.util.GenerationTool /jooq.properties

Note the prefix slash before jooq.properies. Even though it’s in our working directory, we need to prepend a slash.

Replace the filenames with your filenames. In this example, I’m using jOOQ 1.6.8. If everything has worked, you should see this in your console output:

Nov 1, 2011 7:25:06 PM org.jooq.impl.JooqLogger info
INFO: Initialising properties  : /jooq.properties
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Database parameters      
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: ----------------------------------------------------------
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO:   dialect                : MYSQL
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO:   schema                 : guestbook
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO:   target dir             : /Users/ikai/Documents/workspace/MySQLTest/src
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO:   target package         : test.generated
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: ----------------------------------------------------------
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Emptying                 : /Users/ikai/workspace/MySQLTest/src/test/generated
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating classes in    : /Users/ikai/workspace/MySQLTest/src/test/generated
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating schema        : Guestbook.java
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating factory       : GuestbookFactory.java
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Schema generated         : Total: 122.18ms
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Sequences fetched        : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Masterdata tables fetched: 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Tables fetched           : 5 (5 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating tables        : /Users/ikai/workspace/MySQLTest/src/test/generated/tables
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: ARRAYs fetched           : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Enums fetched            : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: UDTs fetched             : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating table         : Posts.java
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Tables generated         : Total: 680.464ms, +558.284ms
Nov 1, 2011 7:25:07 PM org.jooq.impl.JooqLogger info
INFO: Generating Keys          : /Users/ikai/workspace/MySQLTest/src/test/generated/tables
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Keys generated           : Total: 718.621ms, +38.157ms
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Generating records       : /Users/ikai/workspace/MySQLTest/src/test/generated/tables/records
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Generating record        : PostsRecord.java
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Table records generated  : Total: 782.545ms, +63.924ms
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Routines fetched         : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: Packages fetched         : 0 (0 included, 0 excluded)
Nov 1, 2011 7:25:08 PM org.jooq.impl.JooqLogger info
INFO: GENERATION FINISHED!     : Total: 791.688ms, +9.143ms

Step 3. Write a main class and establish MySQL connection

Let’s just write a vanilla main class in the project containing the generated classes:

public class Main {

	public static void main(String[] args) {
		Connection conn = null;
		String userName = "ikai";
		String password = "";
		String url = "jdbc:mysql://localhost:3306/guestbook";
		try {
			Class.forName("com.mysql.jdbc.Driver").newInstance();
			conn = DriverManager.getConnection(url, userName, password);
			conn.close();
		} catch (Exception e) {
			// You'll probably want to handle the exceptions in a real app
			// Don't ever do this silence catch(Exception e) thing. I've seen this in
			// live code and it is horrendous.
			e.printStackTrace();
		} 

	}
}

This is pretty standard code for establishing a MySQL connection.

Step 4: Write a query using jOOQ’s DSL

Let’s add a simple query:

			GuestbookFactory create = new GuestbookFactory(conn);
			Result result = create.select().from(Posts.POSTS).fetch();

We need to first get an instance of GuestbookFactory so we can write a simple SELECT query. We pass an instance of the MySQL connection to GuestbookFactory. Note that factory doesn’t close the connection. We’ll have to do that ourselves.

We then use jOOQ’s DSL to return an instance of Result. We’ll be using this result in the next step.

Step 5: Iterate over results

After the line where we retrieve the results, let’s iterate over the results and print out the data:

			for (Record r : result) {
				Long id = r.getValueAsLong(Posts.ID);
				String title = r.getValueAsString(Posts.TITLE);
				String description = r.getValueAsString(Posts.BODY);
				
				System.out.println("ID: " + id + " title: " + title + " desciption: " + description);
			}

The full program should now look like this:

package test;

import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;

import org.jooq.Record;
import org.jooq.Result;

import test.generated.GuestbookFactory;
import test.generated.tables.Posts;

public class Main {

	/**
	 * @param args
	 */
	public static void main(String[] args) {
		Connection conn = null;
		String userName = "ikai";
		String password = "";
		String url = "jdbc:mysql://localhost:3306/guestbook";
		try {
			Class.forName("com.mysql.jdbc.Driver").newInstance();
			conn = DriverManager.getConnection(url, userName, password);

			GuestbookFactory create = new GuestbookFactory(conn);
		
			Result result = create.select().from(Posts.POSTS).fetch();
		
			for (Record r : result) {
				Long id = r.getValueAsLong(Posts.ID);
				String title = r.getValueAsString(Posts.TITLE);
				String description = r.getValueAsString(Posts.BODY);
			
				System.out.println("ID: " + id + " title: " + title + " desciption: " + description);
			}
			conn.close();
		} catch (Exception e) {
			// You'll probably want to handle the exceptions in a real app
			// Don't ever do this silence catch(Exception e) thing. I've seen this in 
			// live code and it is horrendous.
			e.printStackTrace();
		} 
	
	}
}

Step 6: Profit!

Get a job and go to work like the rest of us.

Conclusion

I haven’t explored the more advanced bits of jOOQ, but, at least judging from the docs, it looks like there’s a lot of meat there. I’m hoping this guide makes it easier for new users to dive in.

– ikai
Currently listening: Sweat – Snoop Dogg vs David Guetta

Advertisements

Written by Ikai Lan

November 1, 2011 at 6:54 pm

GWT, Blobstore, the new high performance image serving API, and cute dogs on office chairs

with 22 comments

I’ve been working on an image sharing application using GWT and App Engine to familiarize myself with the newer aspects of GWT. The project and code are here:

http://ikai-photoshare.appspot.com
http://github.com/ikai/gwt-gae-image-gallery

(Please excuse spaghetti code in client side GWT code, much of it was me feeling my way around GWT. I’ve come to appreciate GWT quite a bit in spite of the fact that I’m pretty familiar with client side development; I’ll write about this in a future post).

The 1.3.6 release of the App Engine SDK shipped with a high performance image serving API. What this means is that a developer can take a blob key pointing to image data stored in the blobstore and call getServingUrl() to create a special URL for serving the image. What are the benefits to using this API?

  • You don’t have to write your own handler for uploaded images
  • You don’t have to consume storage quota for saving resized or cropped images, as you can perform transforms on the image simply by appending URL parameters. You only need to store the final URL that is generated by getServingUrl().
  • You aren’t charged for datastore CPU for fetching the image (you will still be billed for bandwidth)
  • Images are, in general, served from edge server locations which can be geographically located closer to the user

There are a few drawbacks, however, to using the API:

  • There aren’t any great schemes for access control of the images, and if someone has the URL for a thumbnail, they can easily remove the parameters to see a larger image
  • Billing must be enabled – you will only be charged for usage, however, so you don’t have to spend a cent to use the API. You just have to have billing active.
  • Deleting an image blob doesn’t delete the image being served from the URL right away – that image will still be available for some time
  • Images must be uploaded to the blobstore, not the datastore as a blob, so it’s important to understand how the blobstore API works
  • The URLs of the created images are really, really ugly. If you need pretty URLs, it’s probably a better pattern to create a URL mapping to an HTML page that just displays the image in an IMG tag

Blobstore crash course

It’ll be best if we gave a quick refresher course on the blobstore before we begin. Here’s the standard flow for a blobstore upload:

  1. Create a new blobstore session and generate an upload URL for a form to POST to. This is done using the createUploadUrl() method of BlobstoreService. Pass a callback URL to this method. This URL is where the user will be forwarded after the upload has completed.
  2. Present an upload form to the user. The action is the URL generated in step 1. Each URL must be unique: you cannot use the same URL for multiple sessions, as this will cause an error.
  3. After the URL has uploaded the file, the user is forwarded to the callback URL in your App Engine application specified in step 1. The key of the uploaded blob, a String blob key, is passed as an URL parameter. Save this URL and pass the user to their final destination

Got it? Now we can talk about image serving.

Using the image serving URL

Once we have a blob key (step 3 of a Blobstore upload), we can do interesting things with it. First, we’ll need to create an instance of the ImagesService:

ImagesService imagesService = ImagesServiceFactory.getImagesService();

Once we have an instance, we pass the blob key to getServingUrl and get back a URL:

String imageUrl = imagesService.getServingUrl(blobKey);

This can sometimes take several hundred milliseconds to a few seconds to generate, so it’s almost always a good idea to run this on write as opposed to first read. Subsequent calls should be faster, but they may not be as fast as reading this value from a datastore entity property or memcache. Since this value doesn’t change, it’s a good idea to store it. On the local dev server, this URL looks something like this:

/_ah/img/eq871HJL_bYxhWQbTeYYoA

In production, however, this will return a URL that looks like this:

http://lh5.ggpht.com/2PQk0vDo8Bn8oiPba2gtGlDfd1ciD0H0MLrixcT12FCDQEm2oyMW9ErJX_-ZzOHBWbYBKzevK0BY6cxdZ3cxf_37

(Cute dogs below)

You’ve already saved yourself the trouble of writing a handler. What’s really nice about this URL is that you can perform operations on it just by appending parameters. Let’s say we wanted to crop our image to be no larger than 200×200, yet retain scale. We’d simply append “=s200” to the end of the image:

http://lh5.ggpht.com/2PQk0vDo8Bn8oiPba2gtGlDfd1ciD0H0MLrixcT12FCDQEm2oyMW9ErJX_-ZzOHBWbYBKzevK0BY6cxdZ3cxf_37=s144

(Looks like this)

We can also crop the image by appending a “-c” to the size parameter:

http://lh5.ggpht.com/2PQk0vDo8Bn8oiPba2gtGlDfd1ciD0H0MLrixcT12FCDQEm2oyMW9ErJX_-ZzOHBWbYBKzevK0BY6cxdZ3cxf_37=s144-c

(Looks like this – compare with above)

Note that we can also generate these URLs programmatically using the overloaded version of getServingUrl that also accepts a size and crop parameter.

Adding GWT

So now that we’ve got all that done, let’s get it working with GWT. It’s important that we understand how it all works, because GWT’s single-page, Javascript-generated content model must be taken into account. Let’s draw our upload widget. We’ll be using UiBinder:

We’ll create our Composite class as follows:

public class UploadPhoto extends Composite {

    private static UploadPhotoUiBinder uiBinder = GWT.create(UploadPhotoUiBinder.class);

    UserImageServiceAsync userImageService = GWT.create(UserImageService.class);

    interface UploadPhotoUiBinder extends UiBinder {}

    @UiField
    Button uploadButton;

    @UiField
    FormPanel uploadForm;

    @UiField
    FileUpload uploadField;

    public UploadPhoto(final LoginInfo loginInfo) {
        initWidget(uiBinder.createAndBindUi(this));
    }

}

Here’s the corresponding XML file:

<!DOCTYPE ui:UiBinder SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent">
<ui:UiBinder xmlns:ui="urn:ui:com.google.gwt.uibinder"
	xmlns:g="urn:import:com.google.gwt.user.client.ui">
	<g:FormPanel ui:field="uploadForm">
		<g:HorizontalPanel>
			<g:FileUpload ui:field="uploadField"></g:FileUpload>
			<g:Button ui:field="uploadButton"></g:Button>
		</g:HorizontalPanel>
	</g:FormPanel>
</ui:UiBinder> 

(We’ll add more to this later)

When we discussed the Blobstore, we mentioned that each upload form has a different POST location corresponding to the upload session. We’ll have to add a GWT-RPC component to generate and return a URL. Let’s do that now:

// UserImageService.java
@RemoteServiceRelativePath("images")
public interface UserImageService extends RemoteService  {
    public String getBlobstoreUploadUrl();
}

Our IDE will nag us to generate the corresponding Async interface if we have a GWT plugin:

// UserImageServiceAsync.java
public interface UserImageServiceAsync {
    public void getBlobstoreUploadUrl(AsyncCallback callback);
}

We’ll need to write the code on the server side:

// UserImageServiceImpl.java
@SuppressWarnings("serial")
public class UserImageServiceImpl extends RemoteServiceServlet implements UserImageService {

    @Override
    public String getBlobstoreUploadUrl() {
        BlobstoreService blobstoreService = BlobstoreServiceFactory.getBlobstoreService();
        return blobstoreService.createUploadUrl("/upload");
    }

}

This is pretty straightforward. We’ll want to invoke this service on the client side when we build the form. Let’s add this to UploadPhoto:

public class UploadPhoto extends Composite {

private static UploadPhotoUiBinder uiBinder = GWT.create(UploadPhotoUiBinder.class);
UserImageServiceAsync userImageService = GWT.create(UserImageService.class);

interface UploadPhotoUiBinder extends UiBinder {}

    @UiField
    Button uploadButton;

    @UiField
    FormPanel uploadForm;

    @UiField
    FileUpload uploadField;

    public UploadPhoto() {
        initWidget(uiBinder.createAndBindUi(this));

        // Disable the button until we get the URL to POST to
        uploadButton.setText("Loading...");
        uploadForm.setEncoding(FormPanel.ENCODING_MULTIPART);
        uploadForm.setMethod(FormPanel.METHOD_POST);
        uploadButton.setEnabled(false);
        uploadField.setName("image");

        // Now we use out GWT-RPC service and get an URL
        startNewBlobstoreSession();

        // Once we've hit submit and it's complete, let's set the form to a new session.
        // We could also have probably done this on the onClick handler
        uploadForm.addSubmitCompleteHandler(new FormPanel.SubmitCompleteHandler() {

            @Override
            public void onSubmitComplete(SubmitCompleteEvent event) {
                uploadForm.reset();
               startNewBlobstoreSession();
            }
        });
    }

    private void startNewBlobstoreSession() {
        userImageService.getBlobstoreUploadUrl(new AsyncCallback() {

            @Override
            public void onSuccess(String result) {
                uploadForm.setAction(result);
                uploadButton.setText("Upload");
                uploadButton.setEnabled(true);
            }

            @Override
            public void onFailure(Throwable caught) {
                // We probably want to do something here
            }
        });
    }

    @UiHandler("uploadButton")
    void onSubmit(ClickEvent e) {
        uploadForm.submit();
    }

}

This is fairly standard GWT RPC.

So that concludes the GWT part of it. We mentioned an upload callback. Let’s implement that now:

/**
 * @author Ikai Lan
 * 
 *         This is the servlet that handles the callback after the blobstore
 *         upload has completed. After the blobstore handler completes, it POSTs
 *         to the callback URL, which must return a redirect. We redirect to the
 *         GET portion of this servlet which sends back a key. GWT needs this
 *         Key to make another request to get the image serving URL. This adds
 *         an extra request, but the reason we do this is so that GWT has a Key
 *         to work with to manage the Image object. Note the content-type. We
 *         *need* to set this to get this to work. On the GWT side, we'll take
 *         this and show the image that was uploaded.
 * 
 */
@SuppressWarnings("serial")
public class UploadServlet extends HttpServlet {
	private static final Logger log = Logger.getLogger(UploadServlet.class
			.getName());

	private BlobstoreService blobstoreService = BlobstoreServiceFactory
			.getBlobstoreService();

	public void doPost(HttpServletRequest req, HttpServletResponse res)
			throws ServletException, IOException {

		Map blobs = blobstoreService.getUploadedBlobs(req);
		BlobKey blobKey = blobs.get("image");

		if (blobKey == null) {
			// Uh ... something went really wrong here
		} else {

			ImagesService imagesService = ImagesServiceFactory
					.getImagesService();

			// Get the image serving URL
			String imageUrl = imagesService.getServingUrl(blobKey);

			// For the sake of clarity, we'll use low-level entities
			Entity uploadedImage = new Entity("UploadedImage");
			uploadedImage.setProperty("blobKey", blobKey);
			uploadedImage.setProperty(UploadedImage.CREATED_AT, new Date());

			// Highly unlikely we'll ever filter on this property
			uploadedImage.setUnindexedProperty(UploadedImage.SERVING_URL,
					imageUrl);

			DatastoreService datastore = DatastoreServiceFactory
					.getDatastoreService();
			datastore.put(uploadedImage);

			res.sendRedirect("/upload?imageUrl=" + imageUrl);
		}
	}

	@Override
	protected void doGet(HttpServletRequest req, HttpServletResponse resp)
			throws ServletException, IOException {

		String imageUrl = req.getParameter("imageUrl");
		resp.setHeader("Content-Type", "text/html");

		// This is a bit hacky, but it'll work. We'll use this key in an Async
		// service to
		// fetch the image and image information
		resp.getWriter().println(imageUrl);

	}
}

We’ll probably want to display the image we just uploaded in the client. Let’s add a line line of code to register a SubmitCompleteHandler to do this:

	public void onSubmitComplete(SubmitCompleteEvent event) {
		uploadForm.reset();
		startNewBlobstoreSession();

		// This is what gets the result back - the content-type *must* be
		// text-html
		String imageUrl = event.getResults();
		Image image = new Image();
		image.setUrl(imageUrl);

		final PopupPanel imagePopup = new PopupPanel(true);
		imagePopup.setWidget(image);

		// Add some effects
		imagePopup.setAnimationEnabled(true); // animate opening the image
		imagePopup.setGlassEnabled(true); // darken everything under the image
		imagePopup.setAutoHideEnabled(true); // close image when the user clicks
												// outside it
		imagePopup.center(); // center the image

	}

And we’re done!

Get the code

I’ve got the code for this project here:

http://github.com/ikai/gwt-gae-image-gallery

Just a warning, this is a bit different from the sample code above. I wrote this post after I wrote the code, extrapolating the bare minimum to make this work. The sample code above has experimental tagging, delete and catches logins. I’m adding features to it simply to see what else can be done, so expect changes. I’m aware of a few of the bugs with the code, and I’ll get around to fixing them, but again, it’s a demo project, so keep realistic expectations. As far as I can tell, however, the code above should be runnable locally and deployable (once you have enabled billing for blobstore).

Happy developing!

Written by Ikai Lan

September 8, 2010 at 5:00 pm

Posted in App Engine, Java, Java

Using the App Engine Mapper for bulk data import

with 16 comments

Since my last post describing App Engine mapreduce, a new InputReader has been added to the Java project for reading from the Blobstore. Nick Johnson wrote a great demo where indexing was done via reading code uploaded to the blobstore. This was demo’d at Google I/O. Now that the library is officially part of the project, it’s become much easier for developers to build Mappers that map across some large, contiguous piece of data as opposed to Entities in the datastore.The most obvious use case is data import. A developer looking to import large amounts of data would take the following steps:

  1. Create a CSV file containing the data you want to import. The assumption here is that each line of data corresponds to a datastore entity you want to create
  2. Upload the CSV file to the blobstore. You’ll need billing to be enabled for this to work.
  3. Create your Mapper, push it live and run your job importing your data.

This isn’t meant to be a replacement for the bulk uploader tool; merely an alternative. This method requires a good amount more programmatic changes for custom data transforms. The advantage of this method is that the work is done on the server side, whereas the bulk uploader makes use of the remote API to get work done. Let’s get started on each of the steps.

Step 1: Create a CSV file with the data you want to upload

We’re going to go through an example of uploading City and State information. MaxMind.com provides a free GeoIP CSV file. The free version isn’t as full featured as the paid version, but it’ll do fine for our demo. Be sure that if you use this file in any kind of production application that you read and understand the license first! For simplicity, we’re going to parse out only cities in the United States using grep. The file should now contain lines that look like this:

605,"US","NY","Valhalla","10595",41.0877,-73.7768,501,914
606,"US","PA","Pittsburgh","15222",40.4495,-79.9880,508,412
607,"US","MO","Bridgeton","63044",38.7667,-90.4201,609,314
608,"US","CA","San Francisco","94124",37.7312,-122.3826,807,415
609,"US","NY","New York","10017",40.7528,-73.9725,501,212
610,"US","PA","Bear Lake","16402",41.9491,-79.4448,516,814
611,"US","NJ","Piscataway","08854",40.5516,-74.4637,501,732
612,"US","NY","Keuka Park","14478",42.5669,-77.1325,555,315
613,"US","VT","Brattleboro","05302",42.8496,-72.6645,506,802

2. Create an upload handler for your CSV file and upload the CSV file

We’re going to create a basic handler for uploading a CSV file and displaying the key. We’ll need to pass this key to our mapper later. There isn’t too much magic here; it’s very similar to the sample code available for the basic blobstore example.

We’ll do a quick overview of the code we need here, but for the purposes of this post, it’s out of scope. We’ll need these files:

upload.jsp

<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">

<%@page import="com.google.appengine.api.blobstore.BlobstoreService"%>
<%@page import="com.google.appengine.api.blobstore.BlobstoreServiceFactory"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Upload your CSV file here</title>
</head>
<body>
    <% BlobstoreService blobstoreService = BlobstoreServiceFactory.getBlobstoreService(); %>
    <form action="<%= blobstoreService.createUploadUrl("/upload") %>" method="post" enctype="multipart/form-data">
        <input type="file" name="data">
        <input type="submit" value="Submit">
    </form>
</body>
</html>

UploadBlobServlet.java

package com.ikai.mapperdemo.servlets;

import java.io.IOException;
import java.util.Map;

import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

import com.google.appengine.api.blobstore.BlobKey;
import com.google.appengine.api.blobstore.BlobstoreService;
import com.google.appengine.api.blobstore.BlobstoreServiceFactory;

@SuppressWarnings("serial")
public class UploadBlobServlet extends HttpServlet {
	public void doPost(HttpServletRequest req, HttpServletResponse resp)
			throws IOException {

		BlobstoreService blobstoreService = BlobstoreServiceFactory.getBlobstoreService();
		Map<String, BlobKey> blobs = blobstoreService.getUploadedBlobs(req);
		BlobKey blobKey = blobs.get("data");

		if (blobKey == null) {
			resp.sendRedirect("/");
		} else {
			resp.sendRedirect("/upload-success?blob-key=" + blobKey.getKeyString());
		}
	}

}

SuccessfulUploadServlet.java

package com.ikai.mapperdemo.servlets;

import java.io.IOException;

import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

@SuppressWarnings("serial")
public class SuccessfulUploadServlet extends HttpServlet {
	public void doGet(HttpServletRequest req, HttpServletResponse resp)
			throws IOException {

		String blobKey = req.getParameter("blob-key");

		resp.setContentType("text/html");
		resp.getWriter().println("Successfully uploaded. Download file: <br/>");
		resp.getWriter().println(
				"<a href='/serve?blob-key=" + blobKey
						+ "'>Click to download</a>");
	}

}

Source code for this and other helper functions should be available in the Github repository.

Step 3: Create your Mapper

Now we get to the fun part. We need to create our Mapper. A prerequisite for understanding what’s coming next is reading the last post about Mapper I wrote, so check that out before proceeding if you aren’t familiar with Mapper basics. Our Mapper class looks like this:

ImportFromBlobstoreMapper.java

package com.ikai.mapperdemo.mappers;

import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.tools.mapreduce.AppEngineMapper;
import com.google.appengine.tools.mapreduce.BlobstoreRecordKey;
import com.google.appengine.tools.mapreduce.DatastoreMutationPool;

/**
 * 
 * This Mapper imports from a CSV file in the Blobstore. The CSV
 * assumes it's in the MaxMind format for cities, states, zipcodes
 * and lat/long.
 * 
 * 
 * @author Ikai Lan
 *
 */
public class ImportFromBlobstoreMapper extends
		AppEngineMapper<BlobstoreRecordKey, byte[], NullWritable, NullWritable> {
	private static final Logger log = Logger.getLogger(ImportFromBlobstoreMapper.class
			.getName());

	@Override
	public void map(BlobstoreRecordKey key, byte[] segment, Context context) {
		
		String line = new String(segment);
		
		log.info("At offset: " + key.getOffset());
		log.info("Got value: " + line);
		
		// Line format looks like this:
		// 10644,"US","VA","Tazewell","24651",37.0595,-81.5220,559,276
		// We're also assuming no errant commas in this simple example
		
		String[] values = line.split(",");
		String state = values[2];
		String cityName = values[3];		
		String zipcode = values[4];
		Double latitude = Double.parseDouble(values[5]);
		Double longitude = Double.parseDouble(values[6]);		
		
		state = state.replaceAll("\"", "");
		cityName = cityName.replaceAll("\"", "");
		zipcode = zipcode.replaceAll("\"", "");
		
		if(!zipcode.isEmpty()) {
			Entity zip = new Entity("Zip", zipcode);
			zip.setProperty("state", state);
			zip.setProperty("city", cityName);
			zip.setProperty("latitude", latitude);
			zip.setProperty("longitute", longitude);
			
			Entity city = new Entity("City", cityName);
			city.setProperty("state", state);
			city.setUnindexedProperty("zip", zipcode);
			
			DatastoreMutationPool mutationPool = this.getAppEngineContext(context)
					.getMutationPool();
			mutationPool.put(zip);
			mutationPool.put(city);
		}

	}
}

Let’s explain the things in this Mapper that are new:

public class ImportFromBlobstoreMapper extends
AppEngineMapper&lt;BlobstoreRecordKey, byte[], NullWritable, NullWritable&gt;

Note this line. It’s different from our previous Mappers in that the type arguments are no longer Key and Entity, but BlobstoreRecordKey and byte[]. The source for BlobstoreRecordKey is here. Remember that map-reduce is about some large body of data and breaking it into smaller pieces to operate on. BlobstoreRecordKey represents a pointer to range of data in our Blobstore. byte[] is a byte[] array actually containing that data.

public void map(BlobstoreRecordKey key, byte[] segment, Context context)

Again, notice the new types. By default, we are splitting on a newline, so segment represents a single line. We can change what we split on by specifying a terminator in mapreduce.xml.

		String line = new String(segment);
		
		// Line format looks like this:
		// 10644,"US","VA","Tazewell","24651",37.0595,-81.5220,559,276
		// We're also assuming no errant commas in this simple example
		
		String[] values = line.split(",");
		String state = values[2];
		String cityName = values[3];		
		String zipcode = values[4];
		Double latitude = Double.parseDouble(values[5]);
		Double longitude = Double.parseDouble(values[6]);		
		
		state = state.replaceAll("\"", "");
		cityName = cityName.replaceAll("\"", "");
		zipcode = zipcode.replaceAll("\"", "");

This is very naive String parsing. Nothing fancy here.

		if(!zipcode.isEmpty()) {
			Entity zip = new Entity("Zip", zipcode);
			zip.setProperty("state", state);
			zip.setProperty("city", cityName);
			zip.setProperty("latitude", latitude);
			zip.setProperty("longitute", longitude);
			
			Entity city = new Entity("City", cityName);
			city.setProperty("state", state);
			city.setUnindexedProperty("zip", zipcode);
			
			DatastoreMutationPool mutationPool = this.getAppEngineContext(context)
					.getMutationPool();
			mutationPool.put(zip);
			mutationPool.put(city);
		}

Again, very straightforward if you’ve seen this before. Some zipcodes in our CSV file subset are empty, so we’ll check for that and just not create an Entity. We’re adding 2 entities to the mutation pool here – a City and a Zipcode. This ensures that we can search by key when we do a datastore get. Remember that fetches by key are always faster than fetches with a query, since a query requires an index scan followed by a batch get, whereas the datastore can perform a get in a single operation.

That’s it for our Mapper. Let’s add a configuration:

  <configuration name="Import all data from the Blobstore">
    <property>
      <name>mapreduce.map.class</name>
      
      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.ImportFromBlobstoreMapper</value>
    </property>
        
    <!--  This is a default tool that lets us iterate over blobstore data -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.BlobstoreInputFormat</value>
    </property>
    
    <property>
      <name human="Blob Keys to Map Over">mapreduce.mapper.inputformat.blobstoreinputformat.blobkeys</name>
      <value template="optional">blobkeyhere</value>      
    </property>        
    
    <property>
      <name human="Number of shards to use">mapreduce.mapper.shardcount</name>
      <value template="optional">10</value>      
    </property>        
    
  </configuration>  

We’ve changed 2 properties here: the input format class as well as a property for the blobstore key pointing to the data to iterate over.

Step 4: Deploy!

We can now package our application up and deploy it! Make sure that you built a new JAR file with the new classes in appengine-mapreduce! If you have the old JAR file, it won’t include the BlobstoreInputFormat class that we need to do our work.

Step 5: Using the Mapper

Let’s browse to our upload hander at /upload.jsp. The page should be pretty bare.

Once the upload has finished, we’ll be on a page that looks like this:

Let’s copy the blob-key in the URL. It’s not the most streamlined approach but it works. We’ll use it in the next screen when we browser to our mapper:

We’ll copy-paste the key to replace “blobkeyhere” and hit “Run”. And now we play the waiting game – we’ll be able to check on the status of our Mapper in the UI, or check on Tasks, or look in the datastore to see if the data has been imported correctly:

Get the code

The code is here on Github:

http://github.com/ikai/App-Engine-Java-Mapper-API-demos

It’s been updated with the new examples.

Summary

So there you have it: another way of importing data into the datastore. This isn’t a replacement for the bulk uploader, just another option. Here are some useful links for additional information:

App Engine Mapreduce issues tracker – report issues here

Nick Johnson’s post explaining how he built the code search example

One last tip: the best place for questions or discussion is probably the App Engine Discussion Groups, not the comments.

Happy hacking.

Written by Ikai Lan

August 11, 2010 at 10:33 am

Posted in App Engine, Java, Java

Issuing App Engine datastore queries with the Low-Level API

with 13 comments

Last time, I wrote an introduction to using the low-level API for creating entities, setting keys, and getting keys by value.

Basic queries and sorts

These are useful when we know the keys, but its often very useful to be able to query entities by their properties. Consider the Person entities we created for the last example, Alice and Bob:

Entity alice = new Entity("Alice", "Person");
 alice.setProperty("gender", "female");
 alice.setProperty("age", 20);

 Entity bob = new Entity(“Person”, “Bob”);
 bob.setProperty("gender", "male");
 bob.setProperty("age", "23");

 DatastoreService datastore = DatastoreServiceFactory.getDatastoreService();
 datastore.put(alice);
 datastore.put(bob);

Let’s create a query to find the first 10 Persons that are female and sort them by age ascending. How would we write this?

Query findFemalesQuery = new Query("Person");
findFemalesQuery.addFilter("gender", FilterOperator.EQUAL, "female");
findFemalesQuery.addSort("age", SortDirection.ASCENDING);
datastore.prepare(findFemalesQuery).asList(FetchOptions.Builder.withLimit(10));

Here are the steps we took:

  1. Created a Query object, specifying the Query kind
  2. Added a QueryFilter. Note that this is typesafe. We specify the enum representing the FilterOperator we want to use
  3. Added a QuerySort. Again, like the QueryFilter, we select the property to sort on as well as an enum representing either an ascending order or descending order.
  4. We prepare the query. On this result we return it as either an Iterator or as a List of Entities. On this method we can either execute the default query, or we can pass a set of options. In the example above, we use FetchOptions.Builder to set the only option we care about: the limit. We only want 10, so we call withLimit() and pass it 10.

The query interface works well because it’s typesafe where the datastore is typesafe, and not so when the datastore is not – you won’t get errors at runtime because you misspelled “WHERE”, for instance, but you have to be careful not to misspell the properties you are looking for. The flexibility of this interface means that no longer are we constrained by the “every object must have the same bag of properties” frame of thinking. Furthermore, because we don’t need to know the property names apriori (we can use getProperties() and return a Map), we can iterate through this and figure out the keys/value pairs at runtime. This leads to some very powerful abstractions.

Doing a keys only query

It sometimes makes sense for us to only retrieve the keys in a given query. It’s actually incredibly easy, so as long as we know what to expect:

Query findFemalesQuery = new Query("Person");
findFemalesQuery.addFilter("gender", FilterOperator.EQUAL, "female");
findFemalesQuery.addSort("age", SortDirection.ASCENDING);
findFemalesQuery.setKeysOnly();

List<Entity> results = datastore.prepare(findFemalesQuery).asList(
FetchOptions.Builder.withLimit(10));

The only code that’s different in creating the Query object is that we call setKeysOnly(). This still returns a List of entity objects with only the Kind and Key populated. If we wrote a test for this, it would look like this:

Entity alice = results.get(0);
assertEquals("Return Key for Entity", KeyFactory.createKey("Person", "Alice"), alice.getKey());
assertNull("Should not return female property", alice.getProperty("gender"));
assertEquals("Returns Entities with no properties", 0, alice.getProperties().size());

Only the Kind and Key are populated in these Entity objects. Even though the API looks similar, under the hood, the behavior is completely different. Recall how queries work underneath the hood:

  1. Traverse an index and retrieve keys
  2. Using those keys, fetch the entities from the datastore

The time to do a query depends on the index traversal time as well as the number of entities to retrieve. In a keys only query, this is what happens:

  1. Traverse an index and retrieve keys

We completely eliminate step 2 from the process. If all we want is Key information or are counting entities (and the count can be done using only indexes), this is the approach we would take.

Ancestor Queries

Let’s pretend Alice and Bob have child entities:

Entity madHatter = new Entity("Friend", "Mad Hatter", alice.getKey());
Entity doormouse = new Entity("Friend", "Doormouse", alice.getKey());
Entity chesireCat = new Entity("Friend", "Chesire Cat", alice.getKey());

Entity redQueen = new Entity("Friend", "Red Queen", bob.getKey());

datastore.put(madHatter);
datastore.put(doormouse);
datastore.put(chesireCat);
datastore.put(redQueen);

Alice now has Friends Mad Hatter, Doormouse and the Chesire Cat as child entities, while Bob has on the Red Queen. How do we find all friends of Alice or Bob? Like so:

Query friendsOfAliceQuery = new Query("Friend");
friendsOfAliceQuery.setAncestor(alice.getKey());

List<Entity> results = datastore.prepare(friendsOfAliceQuery).asList(FetchOptions.Builder.withDefaults());

Query friendsOfBobQuery = new Query("Friend");
friendsOfBobQuery.setAncestor(bob.getKey());

results = datastore.prepare(friendsOfBobQuery).asList(FetchOptions.Builder.withDefaults());

What’s great about these queries is that the datastore knows exactly where to start. Because keys embed parent Key information – Mad Hatter, Doormouse and the Chesire Cat all have “Alice” as a prefix in their key (this is also why you cannot change an entity’s entity group after creation), we know that we just need to start the query from Alice’s Key and just traverse entities with a Key greater than Alice. It’s also a great way of organizing data. Just be aware that too many transactions on a single entity group will destroy your throughput, so design for as small entity groups as possible.

Summary

Hopefully this blog post explains a few more features of the low-level API. Understanding the low-level API is an important step in understanding the datastore, and understanding the datastore is a critical step for learning how to build efficient, optimized applications for App Engine.

Written by Ikai Lan

July 13, 2010 at 4:43 pm

Using the Java Mapper Framework for App Engine

with 29 comments

The recently released Mapper framework is the first part of App Engine’s mapreduce offering. In this post, we’ll be discussing some of the types of operations we can perform using this framework and how easily they can be done.

Introduction to Map Reduce

If you aren’t familiar with Map Reduce, read more about it from a high level from Wikipedia here. The official paper can be downloaded from this site if you’re interested in a more technical discussion.

The simplest breakdown of MapReduce is as follows:

  1. Take a large dataset and break it into pieces, mapping individual pieces of data
  2. Work on those mapped datasets and reduce them into the form you need

A simple example here is full text indexing. Suppose we wanted create indexes from existing text documents. We would use the Map step to iterate over every document and “map” each phrase or term to a document, then we would “reduce” the mappings by writing them to an index. Map/reduce problems have the advantage of not only being easy to conceptualize as problems that can be distributed and parallelized, but also because there are frameworks that support many of the administrative functions of map-reduce: failure recovery, distribution of work, tracking status of jobs, reporting and so forth. The appengine-mapreduce project seeks to provide as many of these features as possible while making it as easy as possible for developers to write large batch processing jobs without having to think about the plumbing details.

But I only have Map available!

Yes, this is true  – as of the writing of this post, only the “map” step exists, hence why it’s currently referred to as the “Mapper API”. That doesn’t mean it’s not useful. For starters, it is a very easy way to perform some operation on every single Entity of a given Kind in your datastore in parallel. What would you have to build for yourself if Mapper weren’t available?

  1. Begin querying over every Entity in chained Task Queues
  2. Store beginning and end cursors (introduced in 1.3.5)
  3. Create tasks to work with chunks of your datastore
  4. Write the code to manipulate your data
  5. Build an interface to control your batch jobs
  6. Build a callback system for your multitudes of parallelized workers to call when the entire task has completed

It’s certainly not a trivial amount of work. Some things you can do very easily with the Mapper library include:

  • Modify some property or set of properties for every Entity of a given Kind
  • Delete all entities of a single Kind – the functional equivalent of a “DROP TABLE” if you were using a relational database
  • Count the occurrences of some property across every single Entity of a given Kind in your datastore

We’ll go through a few of these examples in this post.

Our Sample application

Our sample application will be a modified version of the Guestbook demo. We’ll add a few additional properties. For simplicity, we’ll use the low-level API, since the Mapper API also uses the low-level API. You can see this application here:
The code is also available to clone via Github if you’d like to follow along.

How to define a Mapper

There are three steps to defining a Mapper:

  1. Download, build and place the appengine-mapreduce JAR files in your WEB-INF/lib directory and add them to your build path. You only need to do this once per project. The steps for doing this are on the “Getting Started” page for Java. You’ll need all the JAR files that are built.
  2. Make sure that we have a DESCENDING index created on Key. This is important! If we run our Mapper locally, this’ll automatically be created in our datastore-indexes.xml file when we deploy our application. One trick to ensure that indexes get built before they are needed, at least in a live application, is to create and deploy an application with the new index configuration to a non-default version. Because all versions use the same datastore and the same set of indexes, this will schedule the index to be built before we need it in the live version. When it has completed, we simply switch the default version over, and we’re ready to roll.
  3. Create your Mapper class
  4. Configure your Mapper class in mapreduce.xml

We’ll go over steps 3 and 4 in each example.

Example 1: Changing a property on every Entity (Naive way)

(You can even use this technique if you just need to change a property on a large set of Entities).

Assuming you’ve already set up your environment for the Mapper servlet, you can dive right in. Let’s create a Mapper classes that goes through every Entity of a given Kind and converts the “comment” property to use all lowercase letters. We’ll also add a timestamp for when we modified this Entity. In this first example, we’ll do this the naive way. This is a very good way to introduce you to very simple mutations on all your Entities using Mapper.

Note that this requires some familiarity with the Low-Level API. Don’t worry – entities edited or saved using the low-level API are accessible via managed persistence interface such as JDO/JPA (and vice versa). If you aren’t familiar with the low-level API, you can read more about it here on the Javadocs.

The first thing we’ll have to do is define a Mapper. We tried as much as possible to mimic Hadoop’s Mapper class. We’ll be subclassing AppEngineMapper, which is itself a subclass of Hadoop’s Mapper. The meat of this class is the map() method, which we’ll be overriding. We’ll also override the taskSetup() lifecycle callback. We’ll be using this to initialize our DatastoreService, though we could probably initialize it in the body of the map() method itself. The other methods are taskCleanup(), setup() and cleanup() – examples here. Let’s have a look at our code below:

package com.ikai.mapperdemo.mappers;

import java.util.Date;
import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.DatastoreService;
import com.google.appengine.api.datastore.DatastoreServiceFactory;
import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.tools.mapreduce.AppEngineMapper;

/**
 *
 * This mapper changes all Strings to lowercase Strings, sets
 * a timestamp, and reputs them into the Datastore. The reason
 * this is a "Naive" Mapper is because it doesn't make use of
 * Mutation Pools, which can do these operations in batch instead
 * of individually.
 *
 * @author Ikai Lan
 *
 */
public class NaiveToLowercaseMapper extends
		AppEngineMapper<Key, Entity, NullWritable, NullWritable> {
	private static final Logger log = Logger
			.getLogger(NaiveToLowercaseMapper.class.getName());

	private DatastoreService datastore;

	@Override
	public void taskSetup(Context context) {
		this.datastore = DatastoreServiceFactory.getDatastoreService();
	}

	@Override
	public void map(Key key, Entity value, Context context) {
		log.info("Mapping key: " + key);

		if (value.hasProperty("comment")) {
			String comment = (String) value.getProperty("comment");
			comment = comment.toLowerCase();
			value.setProperty("comment", comment);
			value.setProperty("updatedAt", new Date());

			datastore.put(value);

		}
	}
}

Notice that this map method takes 3 parameters:

Key key – this is the datastore Key for the Entity we are about to perform an operation on. Mostly this exists for API compatibility with Hadoop, but we don’t really need it yet. For iterating over datastore Entities, we don’t really need this, because we *could* use this to look up the Entity, but we don’t have to because …

Entity value – … because we actually get the Entity already. If we did a lookup for the Entity, we’d double the amount of lookups we do per Entity. We can certainly use the Key to do a lookup using a PersistenceManager or EntityManager and have a populated, typesafe Entity object, but from an efficiency standpoint we’d be doubling our work for some JDO/JPA sugar.

Context context – We don’t need this in our example, but it’s easy to think of the Context as giving us access to “global” values such as temporary variables and configuration files. For a later example in this post, we’ll be using the Context to store a global value in a counter and increment it. For this example, it’s unused.

If you’re familiar at all with the low-level API, this will look very straightfoward (again, I highly encourage you to read the docs). We take an entity, add 2 properties to it, then re-put() the Entity back into the datastore.

Now let’s add this job to mapreduce.xml:

<configurations>
  <configuration name="Naive Mass toLowercase()">
    <property>
      <name>mapreduce.map.class</name>

      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.NaiveToLowercaseMapper</value>
    </property>

    <!--  This is a default tool that lets us iterate over datastore entities -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.DatastoreInputFormat</value>
    </property>

    <property>
      <name human="Entity Kind to Map Over">mapreduce.mapper.inputformat.datastoreinputformat.entitykind</name>
      <value template="optional">Comment</value>
    </property>
  </configuration>
</configurations>

It looks complex, but it’s really not. We define a configuration element and name the job. The name of the job is also the name we’ll see in the GUI when we fire off the job. We need 3 sets of property elements under this element, which are just name/value pairs. Let’s go over each one we used:

Name: mapreduce.map.class
Value: com.ikai.mapperdemo.mappers.NaiveToLowercaseMapper
This one is straightforward – we provide the name of an AppEngineMapper subclass with the map() method we want run.

Name: mapreduce.inputformat.class
Value: com.google.appengine.tools.mapreduce.DatastoreInputFormat
This is a class that takes some input to map over. DatastoreInputFormat is provided by appengine-mapreduce, but it is possible for us to define our own input formatter. For guidance, check out the source of DatastoreInputFormat here.

In a more advanced example (ahem, future blog post), we’ll discuss building our own InputFormat to read from another source such as the Blobstore. For our examples in this post, we won’t need anything beyond DatastoreInputFormat.

Name: mapreduce.mapper.inputformat.datastoreinputformat.entitykind
Value: Comment
This input is specific to DatastoreInputFormat. It tells DatastoreInputFormat which Entity Kind to iterate over. Note that in the mapper console, a user can type in the name of a Kind or edit this Field to reflect the value they want. We can’t leave this blank, though, if we want this to work.

If we browse to the URI at which we’ve defined the Mapper console (in our case /mapper), we see something that looks like this:

“Running jobs” appears when we click “Run”. We can click “Detail” to see the progress of our job, or we can “Abort” to quit the job. Note that aborting a job won’t revert our Entities! We’ll end up with a partially run job if we run a giant mutation, so we’ll have to be cognizant of this when we use this tool.

When the job completes, we’ll take a look at our Comments. Sure enough, they are now all lowercase.

Example 2: Changing a property on every Entity using Mutation Pools

There’s a reason the Mapper in Example 1 is called a Naive Mapper: because it doesn’t take advantage of mutation pools. As we all know, App Engine’s datastore is capable of handling operations in parallel using batched calls. We’re already doing work in parallel by specifying shards, but we’ll want to use batched calls when possible. We do this by adding the mutations we want to a mutation pool, then, periodically as the pool hits a certain size, we flush all the writes to the datastore with a single call instead of individually. This has the advantage of making our map() call as fast as possible, since all we’re really doing is making a list of operations to perform all at once when the system is good and ready. Let’s define the XML file first assuming we call the class PooledToLowercaseMapper:

  <configuration name="Mass toLowercase() with Mutation Pool">
    <property>
      <name>mapreduce.map.class</name>

      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.PooledToLowercaseMapper</value>
    </property>

    <!--  This is a default tool that lets us iterate over datastore entities -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.DatastoreInputFormat</value>
    </property>

    <property>
      <name human="Entity Kind to Map Over">mapreduce.mapper.inputformat.datastoreinputformat.entitykind</name>
      <value template="optional">Comment</value>
    </property>

  </configuration>

It looks almost exactly the same. That’s because the meat is in what we do in the actually class itself:

package com.ikai.mapperdemo.mappers;

import java.util.Date;
import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.tools.mapreduce.AppEngineMapper;
import com.google.appengine.tools.mapreduce.DatastoreMutationPool;

/**
 *
 * The functionality of this is exactly the same as in {@link NaiveToLowercaseMapper}.
 * The advantage here is that since a {@link DatastoreMutationPool} is used, mutations
 * can be done in batch, saving API calls.
 *
 * @author Ikai Lan
 *
 */
public class PooledToLowercaseMapper extends
		AppEngineMapper<Key, Entity, NullWritable, NullWritable> {
	private static final Logger log = Logger
			.getLogger(PooledToLowercaseMapper.class.getName());

	@Override
	public void map(Key key, Entity value, Context context) {
		log.info("Mapping key: " + key);

		if (value.hasProperty("comment")) {
			String comment = (String) value.getProperty("comment");
			comment = comment.toLowerCase();
			value.setProperty("comment", comment);
			value.setProperty("updatedAt", new Date());

			DatastoreMutationPool mutationPool = this.getAppEngineContext(
					context).getMutationPool();
			mutationPool.put(value);
		}
	}
}

Everything looks example the same until these lines:

DatastoreMutationPool mutationPool = this.getAppEngineContext(context).getMutationPool();
mutationPool.put(value);

Aha! So we finally put the context to use. Granted, we use the context as a parameter to another, more useful method, but at least we’re using it.  We acquire a DatastoreMutationPool using the getAppEngineContext(context).getMutationPool() method, then we just call put() and pass the changed entity. DatastoreMutationPool is defined here and is open source.

The interface is similar to that of DatastoreService. There’s not a lot of fancy stuff going on here. put(), as we’ve seen, is defined. get() isn’t, because, well, that method makes no sense in this context. delete() is defined, which brings me to my bonus section:

Bonus Example 2: Delete all Entities of a given Kind

One of the most common questions asked in the group is, “How do I drop table?” Usually, this question is asked by new App Engine developers who don’t yet understand that the datastore is a distributed key-value store and not a relational database. But it’s also a legitimate use case. What if you just wanted to nuke all Entities of a given Kind? Prior to Mapper, you would have had to write your own handler to take care of this. Mapper makes this very easy. Here’s what a generic “DeleteAllMapper” would look like. This will work with *any* Entity Kind:

package com.ikai.mapperdemo.mappers;

import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.tools.mapreduce.AppEngineMapper;
import com.google.appengine.tools.mapreduce.DatastoreMutationPool;

/**
 *
 * This Mapper deletes all Entities of a given kind. It simulates the
 * DROP TABLE functionality asked for by developers.
 *
 * @author Ikai Lan
 *
 */
public class DeleteAllMapper extends
		AppEngineMapper<Key, Entity, NullWritable, NullWritable> {
	private static final Logger log = Logger.getLogger(DeleteAllMapper.class
			.getName());

	@Override
	public void map(Key key, Entity value, Context context) {
		log.info("Adding key to deletion pool: " + key);
		DatastoreMutationPool mutationPool = this.getAppEngineContext(context)
				.getMutationPool();
		mutationPool.delete(value.getKey());
	}
}

That’s it! We wire it up the same way we wire up other Mappers:


  <configuration name="Delete all Entities">
    <property>
      <name>mapreduce.map.class</name>

      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.DeleteAllMapper</value>
    </property>

    <!--  This is a default tool that lets us iterate over datastore entities -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.DatastoreInputFormat</value>
    </property>

    <property>
      <name human="Entity Kind to Map Over">mapreduce.mapper.inputformat.datastoreinputformat.entitykind</name>
      <value template="optional">Comment</value>
    </property>
  </configuration>

I’ve separated each out into its own mapreduce.xml, but this isn’t necessary. A given App Engine project can have multiple configuration elements defined. That’s why there’s a dropdown list in the Mapreduce console GUI.

Example 3: Taking more user input in the Mapper console and counting

Our next example covers using counters in the context. Let’s say that we wanted to allow the User to enter a String, then we iterate over every Entity searching for occurrences of that Substring on-the-fly and not with pre-built indexes. First, let’s discuss the XML configuration we use:

  <configuration name="Count words in all Comments">
    <property>
      <name>mapreduce.map.class</name>

      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.CountWordsMapper</value>
    </property>

    <property>
    	<!--  This is the URL to call after the entire Mapper has run -->
    	<name>mapreduce.appengine.donecallback.url</name>
    	<value>/callbacks/word_count_completed</value>
    </property>

    <!--  This is a default tool that lets us iterate over datastore entities -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.DatastoreInputFormat</value>
    </property>

    <property>
      <name human="Entity Kind to Map Over">mapreduce.mapper.inputformat.datastoreinputformat.entitykind</name>
      <value template="optional">Comment</value>
    </property>

  </configuration>

There’s one new name/value pair:
Name: mapreduce.mapper.counter.substringtarget
Value: Substring
We can pick any name or value we want. We just pick this one because it makes sense. We’ll retrieve this value in the Mapper via the Context. This causes an extra text field to appear in the Mapper console:


The Mapper is below:

package com.ikai.mapperdemo.mappers;

import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.tools.mapreduce.AppEngineMapper;

/**
 *
 * This Mapper takes some input and counts the number of Comments which
 * contain that substring.
 *
 * @author Ikai Lan
 *
 */
public class SubstringMatcherMapper extends
		AppEngineMapper<Key, Entity, NullWritable, NullWritable> {
	private static final Logger log = Logger.getLogger(SubstringMatcherMapper.class
			.getName());

	/*
	 * Get the target that we want to match on and count the number of Comments that
	 * match it
	 */
	@Override
	public void map(Key key, Entity value, Context context) {

	    String substringToMatch = context.getConfiguration().get("mapreduce.mapper.counter.substringtarget");

		String comment = (String) value.getProperty("comment");
		if (comment != null) {
			if(comment.contains(substringToMatch)) {
				log.info("Found match in: " + comment);
				context.getCounter("SubstringMatch", "count").increment(1);
			}
		}

	}
}

We retrieve the value entered by the user with this line of code:

context.getConfiguration().get("mapreduce.mapper.counter.substringtarget");

If the comment we’re current working on contains the substring, we want to increment our count. The context object has a getCounter() method that returns a counter we can increment or decrement:

context.getCounter("SubstringMatch", "count").increment(1);

When our job completes running, we can see the total count when we click “Detail” on the completed job:

More likely than not, however, we’ll want to store this number back in the datastore or do something with it besides stick it into a status page. Good that we mention that …

Example 4: Completion callbacks and JobContexts

Let’s modify Example 3 a bit. Suppose now we want to count the total number of words across all comments. We’ll need to use a counter. But suppose that instead of just displaying it in a console page, we want that number to get stored into the datastore again. Much like Task Queues, incoming email and XMPP, the callback is event driven, and therefore uses the HTTP request to an app URI model to dispatch. That is – we’ll define a servlet with a doPost() handler and read the input out of the parameters.

The first thing we’ll need to do is configure our Mapper to fire off the callback when done. We do this in mapreduce.xml:

  <configuration name="Count substring matches in all Comments">
    <property>
      <name>mapreduce.map.class</name>

      <!--  Set this to be your Mapper class  -->
      <value>com.ikai.mapperdemo.mappers.SubstringMatcherMapper</value>
    </property>

    <!--  This is a default tool that lets us iterate over datastore entities -->
    <property>
      <name>mapreduce.inputformat.class</name>
      <value>com.google.appengine.tools.mapreduce.DatastoreInputFormat</value>
    </property>

    <property>
      <name human="Entity Kind to Map Over">mapreduce.mapper.inputformat.datastoreinputformat.entitykind</name>
      <value template="optional">Comment</value>
    </property>

    <property>
      <name human="Search for substring">mapreduce.mapper.counter.substringtarget</name>
      <value template="optional">Substring</value>
    </property>

  </configuration>

Here’s the property we care about:

Name: mapreduce.appengine.donecallback.url
Value: /callbacks/word_count_completed

The value of this can map to any URI in your application. Just be sure that URI points to the Servlet that will be handling your callback. Let’s define the Mapper class:

package com.ikai.mapperdemo.mappers;

import java.util.logging.Logger;

import org.apache.hadoop.io.NullWritable;

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.tools.mapreduce.AppEngineMapper;

/**
 *
 * This mapper counts the number of total words across all comments. It cheats a
 * bit by just splitting on whitespace and just using the length. This mapper
 * demonstrates use of counters as well as using a completion callback.
 *
 * @author Ikai Lan
 *
 */
public class CountWordsMapper extends
		AppEngineMapper<Key, Entity, NullWritable, NullWritable> {
	private static final Logger log = Logger.getLogger(CountWordsMapper.class
			.getName());

	/*
	 * This is a bit of a lazy implementation more to prove a point than to
	 * actually be correct. Split on whitespace, count words
	 */
	@Override
	public void map(Key key, Entity value, Context context) {

		String comment = (String) value.getProperty("comment");
		if (comment != null) {
			String[] words = comment.split("\\s+");
			int wordCount = words.length;

			// Takes a "group" and a "counter"
			// We'll use these later to store the final count back in the
			// datastore
			context.getCounter("CommentWords", "count").increment(wordCount);
		}

	}
}

Not a lot that’s new here. We use the context again to store a counter. Note that we can increment by any value, not just 1.

Let’s take a look at what our servlet looks like that handles this callback:

package com.ikai.mapperdemo.servlets;

import java.io.IOException;
import java.util.Date;

import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

import org.apache.hadoop.mapreduce.Counter;
import org.apache.hadoop.mapreduce.CounterGroup;
import org.apache.hadoop.mapreduce.Counters;
import org.apache.hadoop.mapreduce.JobID;

import com.google.appengine.api.datastore.DatastoreService;
import com.google.appengine.api.datastore.DatastoreServiceFactory;
import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.EntityNotFoundException;
import com.google.appengine.tools.mapreduce.MapReduceState;
import com.ikai.mapperdemo.mappers.CountWordsMapper;

/**
 * This is the servlet that takes care of any processing we have to do after we
 * have finished running {@link CountWordsMapper}.
 *
 * This is just a standard servlet - we can do anything we want here. We can use
 * any App Engine API such as email or XMPP, for instance, to notify an
 * administrator. We could also store a final state into the datastore - in
 * fact, that is what this example below does.
 *
 * @author Ikai Lan
 *
 */
@SuppressWarnings("serial")
public class WordCountCompletedCallbackServlet extends HttpServlet {

	public void doPost(HttpServletRequest req, HttpServletResponse resp)
			throws IOException {

		String jobIdName = req.getParameter("job_id");
		JobID jobId = JobID.forName(jobIdName);

		// A future iteration of this will likely contain a default
		// option if we don't care which DatastoreService instance we use.
		DatastoreService datastore = DatastoreServiceFactory
				.getDatastoreService();
		try {

			// We get the state back from the job_id parameter. The state is
			// serialized and stored in the datastore, so we pass an instance
			// of the datastore service.
			MapReduceState mrState = MapReduceState.getMapReduceStateFromJobID(
					datastore, jobId);

			// There's a bit of ceremony to get the actual counter. This
			// example is intentionally verbose for clarity. First get all the
			// Counters,
			// then we get the CounterGroup, then we get the Counter, then we
			// get the count.
			Counters counters = mrState.getCounters();
			CounterGroup counterGroup = counters.getGroup("CommentWords");
			Counter counter = counterGroup.findCounter("count");
			long wordCount = counter.getValue(); // Finally!

			// Let's create a special datastore Entity for this value so
			// we can reference it on the ViewComments page
			Entity totalCountEntity = new Entity("TotalWordCount",
					"total_word_count");
			totalCountEntity.setProperty("count", wordCount);

			// Now we timestamp this bad boy
			totalCountEntity.setProperty("updatedAt", new Date());
			datastore.put(totalCountEntity);

		} catch (EntityNotFoundException e) {
			throw new IOException("No datastore state");
		}

	}

}

The JobID comes as a String parameter. We get it like so:

String jobIdName = req.getParameter("job_id");
JobID jobId = JobID.forName(jobIdName);

Be aware of the imports used. Your IDE may import the wrong class, as there is a deprecated JobID and a non-deprecated version.

Once you have the JobID, you use it to retrieve the MapReduceState:

MapReduceState mrState = MapReduceState.getMapReduceStateFromJobID(datastore, jobId);

From the MapReduceState object, we have to perform a bit of a ceremony to get what we want. We need to:

1. Fetch the Counters from the MapReduceState
2. Fetch the appropriate CounterGroup from the Counters object
3. Fetch the named Counter from the CounterGroup
4. Fetch the value from the Counter

Here’s what it looks like in code:

Counters counters = mrState.getCounters();
CounterGroup counterGroup = counters.getGroup("CommentWords");
Counter counter = counterGroup.findCounter("count");
long wordCount = counter.getValue();

We can now do what we want with this count. In our servlet example, we save it to a datastore Entity and use it later on.

Get the code

You’re undoubtedly ready to start playing with this thing. You’ve got everything you need to know. First, here’s the getting started page for appengine-mapreduce in Java:

Here’s my sample source code on GitHub.

Summary

So there you have it: an easy to use tool for mapping operations across entire Entity Kinds. There are still a lot of topics to cover, and we’ll likely explore them in a future article. For instance, I didn’t have a chance to cover building your own InputFormat class. We’re still hard at work extending this framework (such as the “Shuffle” and “Reduce” phases), so please post your feedback in the App Engine groups or file bugs in the issue tracker.

Written by Ikai Lan

July 9, 2010 at 3:35 pm

Posted in App Engine, Java, Java

Introduction to working with App Engine’s low-level datastore API

with 9 comments

App Engine’s Java SDK ships with three different mechanisms for persisting data:

  • JPA – the javax.persistence.* package
  • JDO – Java Data Objects
  • The low-level API

The formal documentation has got some good examples for working with JDO and JPA, but the documentation for working with the low-level API is still a tad sparse. The original purpose of the low-level API was to provide developers a way to build libraries that could do persistence or even build persistence libraries themselves – alternative persistence mechanisms such as Objectify, Twig, SimpleDS and Slim3 all build on top of this API.

For most developers, it may be simpler to use either JDO, JPA or a third-party library, but there are cases in which the low-level API is useful. This post will be a beginner’s guide to writing and retrieving data using this API – we’ll save more advanced topics for future posts.

For those newer to App Engine, let’s define a few terms before we continue:

Entity – An entity is an object representation of a datastore row. Unlike a row in a relational database, there are no predefined columns. There’s only one giant Bigtable, and your entities are all part of that table.

Entity Kind – There are no tables corresponding to types of data. The Kind of the entity is stored as part of the Entity Key.

Entity Key – The primary way by which entities are fetched – even when you issue queries, the datastore does a batch get by key of entities. It’s similar to a primary key in an RDBMS. The Key encodes your application ID, your Entity’s Kind, any parent entities and other metadata. Description of the key is out of scope of this article, but you’ll be able to find plenty of content about Keys when you refer to your favorite search engine.

Properties – Entities don’t have columns – they have properties. A property represents a field of your Entity. For instance, a Person Entity would have a Kind of Person, a Key corresponding to a unique identifier corresponding to their name (for all real world scenarios, this is only true for me, as I’m the only Ikai Lan in the world), and Properties: age, height, weight, eye color, etc.

There are a lot more terms, but these are the ones we’ll be using frequently in this article. Let’s describe a few key features of the low-level API which differ from using a higher level tool such as the JDO and JPA interfaces. Depending on your point of view, these could be either advantages or disadvantages:

  • Typeless entities. Think of an Entity as a Java class with a Key property (datastore Key), a Kind property (String) and Properties (HashMap of Properties). This means that for a given entity kind, it is possible to have two different entities with completely different properties. You could have a Person entity that defines age and weight as its properties, and a separate Person entity that defines height and eye color.
  • No Managers. You instantiate a DatastoreService from a DatastoreServiceFactory, then you get(), put() and query()*. No need to worry about opening or closing managers, detaching objects, marking items dirty, and so forth.
  • Lower startup time. For lower traffic Java websites, loading a PersistenceManagerFactory or EntityManagerFactory can incur additional startup time cost.

We’ll cover queries in a future post. In this post, we’ll just use get() and put(). In this article, we’ll treat App Engine’s datastore as if it were just a giant Map. Frankly, this isn’t a bad simplication – at its lowest level, Bigtable is a key-value store, which means that the Map abstraction isn’t too far from reality.

Let’s create two Entities representing Persons. We’ll name them Alice and Bob. Let’s define them now:

import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.api.datastore.KeyFactory;

Entity alice = new Entity("Alice", "Person");
alice.setProperty("gender", "female");
alice.setProperty("age", 20);

Key bobKey = KeyFactory.createKey("Person", "Bob");
Entity bob = new Entity(bobKey);
bob.setProperty("gender", "male");
bob.setProperty("age", "23");

What we’ve demonstrated here are two of the basic ways to create entities. Entity contains five constructors. We’re just demonstrating two of them here.

We’re defining Alice with a raw constructor. We’re passing two Strings: her key name as well as her kind. As we mentioned before – Entities are typeless, and we can specify just about any String as her type. Effectively, this means that the number of kinds we can have is limited only by the number of kinds that we need, and as long as we don’t lose track of them, we could potentially have hundreds of different kinds without having to create a class for each one. We could even define new kinds at runtime, if we so dared. The key name is what we’ll use to retrieve Alice later on when we need her again. Think of it as a Map or Dictionary Key. Once we have an Entity object, we need to define her properties. For now, we’ll define her gender and her age. Note that, again, Properties behave like Maps, and this means that not only can Entities have hundreds of types of different properties, we could also create new properties at runtime at the expense of compiler type-safety. Choose your poison carefully.

We’re creating Bob’s instance a bit differently, but not too differently. Using KeyFactory’s static createKey method, we create a Key instance. Note the constructor arguments – they are exactly the same: a kind and a key name. In our simple example, this doesn’t really give us any additional benefits except for adding an additional line of code, but more advanced usages in which we may want to create an Entity with a parent, this technique may result in more clear code. And again – we set Bob’s properties using something similar to a Map.

If you’ve been reading Entity’s Javadoc or following along in your IDE, you’ve probably realized by now that Entity does not contain setKey() or setKind() methods. This is because an Entity’s key is immutable. Once an Entity has a key, it can never be changed. You cannot retrieve an Entity from the datastore and change its key – you must create a new Entity with a new Key and delete the old Entity. This is also true of Entities instantiated in local memory.

Speaking of unsaved Entities, let’s go ahead and save them now. We’ll create an instance of the Datastore client and save Alice and Bob:

import com.google.appengine.api.datastore.DatastoreService;
import com.google.appengine.api.datastore.DatastoreServiceFactory;
import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.api.datastore.KeyFactory;

Entity alice = new Entity("Person", "Alice");
alice.setProperty("gender", "female");
alice.setProperty("age", 20);

Key bobKey = KeyFactory.createKey("Person", "Bob");
Entity bob = new Entity(bobKey);
bob.setProperty("gender", "male");
bob.setProperty("age", "23");

DatastoreService datastore = DatastoreServiceFactory.getDatastoreService();
datastore.put(alice);
datastore.put(bob);

That’s it! DatastoreService’s put() method returns a Key that we can use.

Now let’s demonstrate retrieving Alice and Bob by Key from another class:

import com.google.appengine.api.datastore.DatastoreService;
import com.google.appengine.api.datastore.DatastoreServiceFactory;
import com.google.appengine.api.datastore.Entity;
import com.google.appengine.api.datastore.EntityNotFoundException;
import com.google.appengine.api.datastore.Key;
import com.google.appengine.api.datastore.KeyFactory;

Key bobKey = KeyFactory.createKey("Person", "Bob");
Key aliceKey = KeyFactory.createKey("Person", "Alice");

DatastoreService datastore = DatastoreServiceFactory.getDatastoreService();
Entity alice, bob;

try {
    alice = datastore.get(aliceKey);
    bob = datastore.get(bobKey);

    Long aliceAge = (Long) alice.getProperty("age");
    Long bobAge = (Long) bob.getProperty("age");
    System.out.println(”Alice’s age: “ + aliceAge);
    System.out.println(”Bob’s age: “ + bobAge);
} catch (EntityNotFoundException e) {
    // Alice or Bob doesn't exist!
}

The DatastoreService instance’s get() method takes a Key parameter; this is the same parameter we used earlier to construct the Entity representing Bob! This methods throws an EntityNotFoundException. We retrieve individual properties using the Entity class’s getProperty() method – in the case of age, we cast this to a Long.

So there you have it: the basics of working with the low-level API. I’ll likely add more articles in the future about queries, transactions, and more advanced things you can do.

Written by Ikai Lan

June 3, 2010 at 6:46 pm

Lucene In-Memory Search Example: Now updated for Lucene 3.0.1

with 3 comments

Update: Here’s a link to some sample code for Python using PyLucene. Thanks, Joseph!

While playing around with Lucene in my experiments to make it work with Google App Engine, I found an excellent example for indexing some text using Lucene in-memory; unfortunately, it dates back to May 2004 (!!!). I’ve updated the example to work with the newest version of Lucene, 3.0.1. It’s below for reference.

The Pastie link for the code snippet can be found here.

import org.apache.lucene.analysis.standard.StandardAnalyzer;
import org.apache.lucene.document.Document;
import org.apache.lucene.document.Field;
import org.apache.lucene.index.IndexWriter;
import org.apache.lucene.queryParser.ParseException;
import org.apache.lucene.queryParser.QueryParser;
import org.apache.lucene.search.*;
import org.apache.lucene.store.RAMDirectory;
import org.apache.lucene.util.Version;

import java.io.IOException;

public class LuceneTest{

   public static void main(String[] args) {
      // Construct a RAMDirectory to hold the in-memory representation
      // of the index.
      RAMDirectory idx = new RAMDirectory();

      try {
         // Make an writer to create the index
         IndexWriter writer =
                 new IndexWriter(idx, 
                         new StandardAnalyzer(Version.LUCENE_30), 
                         IndexWriter.MaxFieldLength.LIMITED);

         // Add some Document objects containing quotes
         writer.addDocument(createDocument("Theodore Roosevelt",
                 "It behooves every man to remember that the work of the " +
                         "critic, is of altogether secondary importance, and that, " +
                         "in the end, progress is accomplished by the man who does " +
                         "things."));
         writer.addDocument(createDocument("Friedrich Hayek",
                 "The case for individual freedom rests largely on the " +
                         "recognition of the inevitable and universal ignorance " +
                         "of all of us concerning a great many of the factors on " +
                         "which the achievements of our ends and welfare depend."));
         writer.addDocument(createDocument("Ayn Rand",
                 "There is nothing to take a man's freedom away from " +
                         "him, save other men. To be free, a man must be free " +
                         "of his brothers."));
         writer.addDocument(createDocument("Mohandas Gandhi",
                 "Freedom is not worth having if it does not connote " +
                         "freedom to err."));

         // Optimize and close the writer to finish building the index
         writer.optimize();
         writer.close();

         // Build an IndexSearcher using the in-memory index
         Searcher searcher = new IndexSearcher(idx);

         // Run some queries
         search(searcher, "freedom");
         search(searcher, "free");
         search(searcher, "progress or achievements");

         searcher.close();
      }
      catch (IOException ioe) {
         // In this example we aren't really doing an I/O, so this
         // exception should never actually be thrown.
         ioe.printStackTrace();
      }
      catch (ParseException pe) {
         pe.printStackTrace();
      }
   }

   /**
    * Make a Document object with an un-indexed title field and an
    * indexed content field.
    */
   private static Document createDocument(String title, String content) {
      Document doc = new Document();

      // Add the title as an unindexed field...

      doc.add(new Field("title", title, Field.Store.YES, Field.Index.NO));


      // ...and the content as an indexed field. Note that indexed
      // Text fields are constructed using a Reader. Lucene can read
      // and index very large chunks of text, without storing the
      // entire content verbatim in the index. In this example we
      // can just wrap the content string in a StringReader.
      doc.add(new Field("content", content, Field.Store.YES, Field.Index.ANALYZED));

      return doc;
   }

   /**
    * Searches for the given string in the "content" field
    */
   private static void search(Searcher searcher, String queryString)
           throws ParseException, IOException {

      // Build a Query object
      QueryParser parser = new QueryParser(Version.LUCENE_30, 
              "content", 
              new StandardAnalyzer(Version.LUCENE_30));
      Query query = parser.parse(queryString);


      int hitsPerPage = 10;
      // Search for the query
      TopScoreDocCollector collector = TopScoreDocCollector.create(5 * hitsPerPage, false);
      searcher.search(query, collector);

      ScoreDoc[] hits = collector.topDocs().scoreDocs;

      int hitCount = collector.getTotalHits();
      System.out.println(hitCount + " total matching documents");

      // Examine the Hits object to see if there were any matches

      if (hitCount == 0) {
         System.out.println(
                 "No matches were found for \"" + queryString + "\"");
      } else {
         System.out.println("Hits for \"" +
                 queryString + "\" were found in quotes by:");

         // Iterate over the Documents in the Hits object
         for (int i = 0; i &lt; hitCount; i++) {
            ScoreDoc scoreDoc = hits[i];
            int docId = scoreDoc.doc;
            float docScore = scoreDoc.score;
            System.out.println("docId: " + docId + "\t" + "docScore: " + docScore);

            Document doc = searcher.doc(docId);

            // Print the value that we stored in the "title" field. Note
            // that this Field was not indexed, but (unlike the
            // "contents" field) was stored verbatim and can be
            // retrieved.
            System.out.println("  " + (i + 1) + ". " + doc.get("title"));
            System.out.println("Content: " + doc.get("content"));            
         }
      }
      System.out.println();
   }
}

In progress: still trying to figure out how to get some version of Lucene working on App Engine for Java. My thoughts:

  • Use an In Memory index
  • Serialize to Memcache or the Datastore (not even sure how to do this right now)

Granted, there are limitations to this: if an App Engine application exceeds some memory limit, a SoftMemoryExceeded exception will be thrown. Also – I’m doubtful of the ability to update indexes incrementally in the datastore: not to mention, there’s a 1mb limit on datastore entries. The Blobstore, accessed programmatically, may not have the latency required. Still – it’s an interesting thought experiment, and there’s probably some compromise we can find with a future feature of App Engine that’ll allow us to make Lucene actually usable. We just have to think of it. Stay tuned. I’ll write another post if I can get even a proof-of-concept to work.

Written by Ikai Lan

April 24, 2010 at 8:32 am